Filter
Top Products
38
Section 6: Features & Benefits
RCF2784 Rotary Cutters 326-364M
12/15/15
Table of Contents
Section 6: Features & Benefits
RCF2784 Model
Features Benefits
Surpassed rugged
industry standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
Cat. 4 driveline with
4-plate slip-clutch
Slip-clutch driveline offers convenience for continual work.
Dual position clevis type
3-Point floating top link
Permits deck to follow the terrain for an even cut.
Lower clevis type
3-Point hitch
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even
pull from the tractor’s lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck & 1/4" side
skirt construction
Can withstand more abuse than lighter gauge decks.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Adds additional strength.
Extended cutter front For increased material flow and added protection.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
10 1/8" Deck Height Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height Provides for a wide range of cutting conditions.
1/4" x 2 1/2" x 18 7/16" Long skid
shoes
Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated
free swinging blades
Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" x 24" x 38" Oval
stump jumper
Standard Oval stump jumper slides over stumps, rocks and debris.
High blade tip speed Ensures clean cut.
15" Laminated tailwheel Laminated material is long lasting in rough conditions. Can’t go flat.
1 1/2" Heavy-duty spindle
on tailwheel
Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Optional Front Guarding
Protect against flying debris.
Customer can choose to include single chain or rubber guarding.
Single Chain Rear Guarding Protect against flying debris.