Filter
Top Products
32
Section 4: Maintenance & Lubrication
RCF2784 Rotary Cutters 326-364M
12/15/15
Table of Contents
Skid Shoe Maintenance
Refer to Figure 4-5:
326-120A Skid Shoe Kit
(Includes 2 skid shoes & mounting hardware)
!
WARNING
Excessive wear on skid shoes can damage side panels, cause
inadequate operation of cutter, and create a safety hazard.
Always replace skid shoes at the first sign of wearing thin.
There are skid shoes mounted on the cutter sides. Check
both skid shoes for wear and replace if necessary. Order
only genuine Land Pride parts from your local Land Pride
dealer.
1. Remove 3/8" hex whiz nuts (#3), 3/8" plow bolts (#2),
and skid shoe (#1) as shown.
2. Plow bolts should be checked for wear and replaced
when worn.
3. Attach new skid shoe (#1) to cutter with existing
3/8" plow bolts (#2), and secure with 3/8" hex whiz
nuts. Tighten to the correct torque.
4. Repeat on opposite side.
Skid Shoe Replacement
Figure 4-5
33034
Land Pride Skid Shoe Replacement Parts
Item Part No. Part Description
1 326-221D SKID SHOE
2 802-603C PLOW 3/8" - 16 x 1" GR5
3 803-198C NUT HEX WHIZ 3/8-16 PLT