Filter
Top Products
17
Section 2: Operating Procedures
ZSR54, & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-344M
Table of Contents
12/15/15
To Decrease Speed and Stop
!
WARNING
In the event of a system shutdown while mowing, move control
levers to neutral, and spread them fully apart. Also, engage
the park brake lever to aid in slowing and stopping the mower.
Refer to Figure 2-7 on page 17:
Moving control levers an equal distance towards neutral
will decrease travel speed.
• When moving forward, pull back gently on control
levers to decrease speed. The further back the control
levers are pulled the slower the travel speed until
neutral is reached.
• When backing up, push forward gently on control
levers to decrease speed. The further forward the
control levers are pushed the slower the travel speed
until neutral is reached.
• Move control levers to neutral to stop. (Ref. Frame #2)
• Spread both control levers fully apart and engage the
park brake. (Ref. Frame #1)
To Steer
Refer to Figure 2-7 on page 17:
• To Steer Straight While Traveling Forward
(Ref. Frame #3):
Push control levers forward an equal distance.
• To Steer Straight While Backing Up (Ref. Frame #4):
Pull control levers rearward an equal distance.
• To Turn Left While Traveling Forward (Ref. Frame #5):
Move right control lever farther forward from neutral
than the left control lever.
• To Turn Left While Backing Up (Ref. Frame #6):
Move right control lever farther back from neutral
than the left control lever.
• To Turn Right While Traveling Forward:
Move left control lever farther forward from neutral
than the right control lever.
• To Turn Right While Backing Up:
Move left control lever farther back from neutral than
the right control lever.
• To Make A Pivot Turn (Ref. Frame #7):
Move one control lever forward and the other control
lever back of neutral, this will allow the drive wheels
to counter-rotate.
Figure 2-7
Front of Mower Faces This Direction
25880
1 2
3
6 74 5