Filter
Top Products
STEP 23
Install handles as shown. Note orientation of handle.
Hand tighten knob. Flat screw has a screw driver notch.
Do not over tighten either knob or flat screw as cracked
glass may result.
GLASS
DOOR
WASHERS
LARGE
WASHER
INTERIOR OF
SHOWER
DOOR
HINGE
TOWER COVER
INSERT THIS SIDE FIRST
TOWER COVER
TOWER TOP PLATE
TOWERS AND DOOR INSTALLATION
COVER CAP
STEP 20 (2 WALL ONLY)
Install fixed glass cover cap on wall post.
STEP 22
Install all towers' top cover.
STEP 24
Turn on water supply and check for leaks. Correct any
leaks before continuing the installation.
STEP 25
Install all tower cover panels as shown. Align left side
of tower cover panel with inside seat in each tower.
Begin each panel's snap in at the top of the tower.
TOWER
TOP COVER
SCREWS
(2) PER TOWER
16
Jacuzzi Whirlpool Bath
©
BZ00000 03/05
STEP 21
Screw tower jamb to wallpost using 3 screws (pro-
vided).