Filter
Top Products
STEP 10
Two shut-off valves are provided per water tower. To hook up supply lines, unscrew valves from braided line. Using
thread sealant, screw each valve to stub out at bottom of tower. Then reconnect braided line using provided gasket.
Do not twist or kink supply lines when connecting. Perform this step for both water towers.
SHUT OFF
VALVES
(PROVIDED)
COLD
HOT
CAULK AROUND SUPPLY
PIPING AND INSIDE TOWER BASE
STEP 11 (WITH AIR FEATURE ONLY)
Attach air supply pipe to air tower plumbing.
TOWERS AND DOORS INSTALLATION
12
Jacuzzi Whirlpool Bath
©
BZ00000 03/05