Filter
Top Products
Caveats Resolved in Release 4.0.3.C
70
Release Notes for VPN Client, Release 4.0 through Release 4.0.5.D
OL-5450-10
• CSCeb41256
A VPN Client, version 4.0.1, can't initialize the virtual adapter while
attempting an IPSEC connection after “undocking” from a docking station.
When attempting a connection the following message appears in the VPN
Client logs:
Sev=Warning/2IKE/0xE3000099
Failed to active IPSec SA: Unable to enable Virtual Adapter
(NavigatorQM:938)
In summary:
Docked- successful connect
Undocked- failure to enable adapter
Redocked- failure to enable adapter
The only way to recover is to reboot the system.
• CSCed01742
When the VPN Client connection is initiated via CLI from Terminal Server
client, and no one is logged on the Terminal server, then the VPN Connection
fails.
• CSCed38308
Release 4.x VPN Client for Windows with Auto-initiation prompts to
disconnect or suspend when the Windows machine is shutdown. This happens
with all Release 4.x VPN Clients with auto-initiation turned on.
Caveats Resolved in Release 4.0.3.C
Release 4.0.3.C resolves the following issues:
• CSCdz64545
With Datakey Smart Cards, after a user logs off a Windows session and logs
back in, the user is not prompted to re-enter the Smart Card credentials by
receiving a prompt for a password.