Filter
Top Products
Open Caveats
42
Release Notes for VPN Client, Release 4.0 through Release 4.0.5.D
OL-5450-10
Others like 3COM 3C510, and D-Link DI-704 either had updated firmware
that was tested and failed, or had Beta firmware that was NOT tested because
the firmware notes did not indicate a fix specifically for fragmentation.
• CSCdu87521
The following message might appear when a connection using the EnterNet
300 version 1.4 PPPoE software and transferring via FTP:
93 09:42:06.020 08/02/01 Sev=Warning/2 IPSEC/0xE3700002
Function CniInjectSend() failed with an error code of 0xe4510000
(IPSecDrvCB:517)
This does not interfere with your connection. You can ignore this message.
• CSCdv40009
When Zone Alarm's Internet setting is set to high and the VPN Concentrator
sends a CPP firewall policy that allows inbound traffic on a specific port, the
CPP rule takes precedence over the Zone Alarm rule allowing the specified
port to be open.
• CSCdv42414
Importing a PKCS12 (*.p12 or *.pfx) certificate using the Certificate
Manager that has not been password protected will fail with the following
error:
“Please make sure your import password and your certificate protection
password (if for file based enrollment) are correct and try again.”
Workaround:
Get a *.p12 certificate that has been password protected.
• CSCdv44529
Attempting to install/uninstall Gemplus Workstation version 2.x or earlier
while the Cisco VPN Client and its GINA (csgina.dll) is installed will cause
the following error, and Gemplus will not install/uninstall:
“A 3rd party GINA has been detected on your system. Please uninstall it
before installing this product.”
Workaround:
Do one of the following:
–
Uninstall the VPN Client and reinstall it after Gemplus software.