Filter
Top Products
Usage Notes
20
Release Notes for VPN Client, Release 4.0 through Release 4.0.5.D
OL-5450-10
Connection
Type Procedure
Physical
Adapters
Use the SetMTU utility supplied with the Cisco VPN Client.
Dial-up Use the SetMTU utility supplied with the Cisco VPN Client.
PPPoE - All
Vendors
Windows XP only
Use SetMTU
PPPoE -
EnterNet
Windows 98
• On the main desktop, right click on My Network Places and go to Properties. The
Network window opens.
• Double-click the Network TeleSystems PPPoE Adapter.
• On the Network TeleSystems window, click the Advanced tab, and then click
MaxFrameSize. Change the value here. The value varies from case to case. The
range can be from 1200 to 1400.
Windows 2000
• On the main desktop, right-click My Network Places and go to Properties. The
Network and Dial-Up Connections window opens.
• Right-click and go to Properties on each connection until you find the connection
that has the NTS EnterNet PPPoE Adapter.
• Once you find the correct connection, click Configure on the right side of the
window.
• On the next window, click the Advanced tab, then click MaxFrameSize. Change the
value here. The value varies from case to case. The range can be from 1200 to 1400.