Filter
Top Products
26
6
SCANS
■ Automatic bank limit/skip functions
When starting a scan, the following functions are
automatically turned ON by default; and the [SKIP]
and [BANK] switches are deactivated during scan.
•The bank limit function (for memory scan and select
memory scan)—The memory scan operates within
the selected bank only.
•Turning OFF the automatic function
qPush [MEMO] for 1 sec.
•A display as at right appears.
wRotate the [M-CH] selector to
select the item, SKIP or
BANK.
eRotate the main dial to select
the function AUTO or MANU-
AL.
rPush [MEMO] to return to the
previous display.
SKIP AUTO
SKIP MANUAL
BANK AUTO
BANK MANUAL
The skip function is turned ON automatical-
ly at scan start.
[SKIP] does not function during scan.
The bank limit function is turned ON au-
tomatically at scan start.
[BANK] does not function during scan.
The scan skip function is turned ON and
OFF by [SKIP] regardless of scan start.
The bank limit function is turned ON and
OFF by [BANK] regardless of scan start.
■ Voice scan control function
This function is useful when you don’t want unmodu-
lated signals pausing or cancelling a scan. When
activated, the receiver checks received signals for
voice components.
If a receiver signal includes voice components, and
the tone of the voice components changes within 1
sec., scan pauses (or stops). If the received signal
includes no voice components or the tone of the
voice components does not change within 1 sec.,
scan resumes.
To toggle the function ON and OFF, push [VSC].
•“VSC” appears while it is activated.
•The VSC function activates for any scan.
•The VSC function resumes the scan on unmod-
ulated signals even when the resume condition is
set to “OFF” or “
∞
”.
Scan edge 1
Scan
Skip
Scan pauses or is
cancelled.
Unmodulated
signal
Modulated
signal
Scan edge 2
FM VSC
OFF
kHz
DLY
∞
ICOM- IC-R8500
VSC appears
•The skip function (for any scan except priority
scan)—memory channels specified as skip chan-
nels are not checked during memory scan and
select memory scan; the frequencies which are pro-
grammed into memory channels as skip channels
(not only in the skip bank but any memory chan-
nels) during programmed scan and auto memory
write scan.