Filter
Top Products
20
5
MEMORY CHANNELS
■ Channel/bank names
Channel names of up to 8 characters and bank names
of up to 5 characters can be programmed for conve-
nience. Programmed names can be easily copied to
other channels using the copy/paste function.
qSelect the desired memory channel.
wSet the frequency (and mode/tuning steps), then
push and hold the [MW] key.
•When no data is programmed, “BLANK” appears and
memory names cannot be programmed.
ePush [CE
≈
•NAME].
•A cursor appears at the first character space of the
name area.
rEnter the desired name via the keypad.
•Push the appropriate keys to input the desired charac-
ters.
•To erase a character, overwrite with a ‘space’ using the
[
M-CH
• ] key.
•To move the cursor forwards or backwards, use the [•
Ω
]
or [CE
≈
] key.
tPush [ENT] to input the set name.
qSelect the desired bank using [M-CH •BANK
▲
] or
[ENT• BANK
▼
].
wPush [CE
≈
•NAME].
•A cursor appears at the first character space of the
name area.
•When no data is programmed, (“BLANK” appears) the
cursor does not appear. Program a frequency or
change the channel in such cases.
ePush [•
Ω
] to move the cursor to the bank name
area.
rEnter the desired name via the keypad.
•Use the same method as for channel names (see
above).
tPush [ENT] to input the set name.
NOTE: When using [CE
≈
] on the last digit of the
bank name, the current name is cleared and the
previous one is substituted. DO NOT forget to
push [ENT] after the bank name is set.
[CE
s
• NAME] key
1 QZ
ENT
BANK
ENT
WXY
9
NAME
CE
to
USR-A
USR-A
USR-A MEMONAME
USR-A MEMONAME
D Channel name programming
D Bank name programming
USR-A
USR-A
USR-A MEMONAME
MEMONAME
MEMONAME
BANKN MEMONAME
BANKN MEMONAME
ENT
BANK
ENT
.
NAME
CE
5 times
1 QZ
WXY
9
to