Filter
Top Products
15. PALLET FORK ATTACHMENT
CAUTION
FORK TINES MUST BE ADJUSTED OUT-
WARD AND LOCKED BEHIND PARKING
ANGLES BEFORE PARKING LOADER.
NEVER OPERATE PALLET FORKS WITH-
OUT GUARD ASSEMBLY INSTALLED.
TO AVOID SERIOUS INJURY OR DEATH:
★ NEVER LIFT LARGE ROUND HAY
BALES OR OTHER LOADS ON THE
FORK LIFT ATTACHMENT THAT
COULD ROLL BACK ONTO TRACTOR
OPERATOR AREA.
★ NEVER USE FORK LIFT ATTACHMENT
TO LIFT OR SUPPORT PEOPLE.
★ TRANSPORT LOADS LOW AND SLOW.
★ AVOID CONTACT WITH POWER LINES.
IMPORTANT: When parking loader with pallet
fork attached, fork tines must be adjusted out-
ward and locked behind parking angles before
parking loader. Refer to Figure 1.
INSTALLATION INSTRUCTIONS
IMPORTANT: Refer to pages 29 & 30 for instruc-
tions concerning Installing Attachment to Quick
Draw Latch Attach.
IMPORTANT: Refer to page 31 for instructions
concerning Removing Attachment from Quick
Draw Latch Attach.
OPERATING INSTRUCTIONS
The pallet fork attachment has two tines, 44" long,
and adjustable from 12" to 50" in width. The opera-
tor must keep the load centered and as far back on
the forks as possible. Operator must always keep
load level. Carry the load low and at a slow speed.
Figure 1
WARNING
PARKING ANGLES
35