Filter
Top Products
IMPORTANT: The quick draw latch attach must only be used in combination with quick draw buckets or
attachments. To verify that your bucket or attachment can be used with your quick draw latch attach,
inspect inside of upper channel to see that weld-in center support has been incorporated within chan-
nel section. Refer to Figure 3. If your bucket or attachment does not incorporate this support, consult
your Bush Hog Dealer.
(1) Upper channel.
(2) Weld-in center support.
(3) Bucket or attachment.
QUICK DRAW HANDLE DISENGAGED POSITION:
To position quick draw handle into the handle disen-
gaged position, pull quick draw handle to the left as
shown in Figure 4 and then lock into quick draw
notch as shown in Figure 5.
(1) Handle disengaged position.
(3) Quick draw notch.
(4) Handle engaged arrow of decal.
QUICK DRAW HANDLE ENGAGED POSITION:
Figure 6 shows quick draw handle in the handle
engaged position. When quick draw handle is in this
position, quick draw handle must line up with handle
engaged arrow located on Warning Decal. Refer to
Figure 5.
(2) Handle engaged position.
Figure 3
Figure 4
Figure 5
Figure 6
28