Filter
Top Products
GB - 5
1. WARNING!
2. CAUTION!
3. DANGER!
4. DANGER!
5. HOT SURFACES!
EMISSION CONTROL SYSTEM
This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with
emission controls and components by
unauthorized personnel may result in severe
fines or penalties. Emission controls and
components can only be adjusted by an
Ariens Company dealer or an authorized
engine manufacturer's service center.
Contact your Ariens Company Equipment
Retailer concerning emission controls and
component questions.
SAFETY RULES
Read, understand, and follow all safety
practices in Owner/Operator Manual before
beginning assembly or operating. Failure to
follow instructions could result in personal
injury and/or damage to unit.
ALWAYS remove key and/or wire from spark
plug before assembly, maintenance or
service. Unintentional engine start up can
cause death or serious injury.
Complete a walk around inspection of unit
and work area to understand:
• Work area • Your unit • All safety decals
Never direct discharge towards
persons or property that may be
injured or damaged by thrown
objects.
Keep children and people away.
Keep children out of work area
and under watchful care of a
responsible adult.
Stop engine, remove key, read
manual before making any
repairs or adjustments.
Read Owner/Operator Manual.
• Allow operation only by
properly trained adult,
never children.
Wear appropriate hearing
protection. Always wear safety
goggles or safety glasses with
side shields when operating.
Operator should wear a dust
particle mask at all times while
clearing debris
Be sure to engage the traction
drive clutch first. Engaging the
attachment clutch before traction
drive clutch can causes the unit
to travel backwards.
Keep clear of brush while
engine is running.
OL0910
OL4370
OL4010
OL4690
OL4695
1
2
NEVER use your hands to clear
blockages.
Operating on irregular terrain
could cause the brush to dig in
and drive the machine rearward.
Read Owner/Operator Manual.
• Allow operation only by
properly trained adult,
never children.
Avoid injury - Stay clear of
rotating parts.
DO NOT touch parts which are
hot from operation. ALWAYS
allow parts to cool.
OL1820
OL1801