Filter
Top Products
© 2005 Alamo Group Inc.
2-23
MACHETE
Warranty Compensation will be provided following proper filing of warranty claim in accordance with
the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a
specific region. Any Warranty associated with this service bulletin must be within authorized dates.
Service Bulletin 991012 Continued from previous Page
SERVICE BULLETIN
No. 991012
Parts Required: (order Kit #02975672)
Part No. Qty Description
02975672 1 Turning Arm
Update Kit
63096300 1 Paint, Spray Can,
Industrial Yellow
P/N 02975672 Kit includes these items
Part No. Qty Description
02956765 1 Bolt
00015800 1 Nut
02975430 1 Boss With Groove
02975429 1 Snap Ring Groove
9. Remove Supporting Hoist and all Jacks. Check to make certain Retaining Bolt Nut is tightened,
Snap ring is installed and seated into groove. Start and Test movement of Boom trough the
Swing functions to make sure it move freely and is not binding.
Nut and Bolt
Snap Ring
Boss w/ Snap
Ring Groove
Figure 1
ccccccccccccccccccc
ccccccccccccccccccccccccc
cccccccccc
ccccccccccccccccccccccccccc
Turning Arm Pin
Main Frame
Turning Arm
Retaining Bolt
Figure 2
ccccccccccccccccccc
ccccccccccccccccccccccccc
cccccccccc
ccccccccccccccccccccccccccc
Turning Arm Pin
Main Frame
Turning Arm
Retaining Bolt
Figure 3
Hydraulic Jack
1/2" Steel Plate
Turning Arm Pin
Figure 4
Hydraulic Jack
1/2" Steel Plate
ccccccccccccccccccc
ccccccccccccccccccccccccc
cccccccccc
ccccccccccccccccccccccccccc
Main Frame
Turning Arm
Retaining Bolt
Grooved Boss
Existing Boss