Filter
Top Products
© 2005 Alamo Group Inc.
2-8
MACHETE
SERVICE BULLETIN No. 962503-2
Alamo Industrial Technical Services Department
1502 East Walnut
Seguin, Texas 78155
830-372-2708
Lower Crossmember Kit Installation:
Subject:
Install lower frame rail crossmember kit to reduce frame rail deflection and movement.
Service Required:
1. Install Crossmember between frame rails under tractor and aligned with the upright section of
frame rails as shown in figure 1.
2. Using large C-Clamps clamp the crossmember uprigts to the frame rails. The bolts in the
crossmember will need to be loose when you do this, the holes for these bolts are slotted.
3. Weld the uprights of the cross member to the upright of the frame rail on both sides. retighten the
bolts in cross member. Cleand welded are and repaint welded are and crossmember. 2 Cans
Spay Paint, High Gloss Black (Obtain Locally)
Parts Required: Part No. Qty Description
02970118 1 Frame Rail Support Kit
Models: Machete Boom Mowers
S/N MB21-01001 to 01015 (& PT002)
S/N MB24-01001 to 01012 (& PT002)
Date:
Mar. 25, 1996
Bulletin No:
962503-2
(Old # 960002)
Parts:
100 % at Dealer Net
Labor:
2.0 hr. at Dealer registered
Shop Rate
Termination Date:
Oct. 1, 1996
Old Parts Disposition:
No Returnable Parts
involved
Warranty Compensation will be provided following proper filing of warranty claim in accordance with
the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a
specific region. Any Warranty associated with this service bulletin must be within authorized dates.
Frame Rail Support Kit
P/N 02970118
Frame Rail, RH Shown
Weld Here both side and
both frame rails
Figure 1