Filter
Top Products
OPERATION
Operation Section 4-4
OPERATION
© 2004 Alamo Group Inc.
SR14/SR20 10/03
Horsepower Required (Min.)....... 75 HP 75 HP
Cutting Capacity (Diameter)........2” 2”
Cutting Height............................2”-13” 2”-13”
Safety Deflectors*.......................Standard Standard
Cutting Width............................240” 162”
Transport Width.........................105” 106”
Overall Width.............................248” 170”
Overall Length............................203” 203”
Blade Overlap.............................6” 6”
Weight (Approximate)................ 5,885 lbs. 5,781 lbs.
Wing Lift....................................Hydraulic Hydraulic
Wing Flex (Degrees)..................90° Up-22° Down 90° Up-22° Down
Jack Stand............................... Standard Standard
Hitch........................................Heavy-Duty Clevis Heavy-Duty Clevis
Blade Carrier..............................Pan or Bar Pan or Bar
Gearbox Rating:**
Power Divider.......................180 HP 180 HP
Center & Wings...................140 HP 140 HP
Output Shaft Diameter............... 2-3/8” 2-3/8”
Blade Tip Speed
Center 540 RPM................14,369 FPM 14,369 FPM
1000 RPM................15,062 FPM 15,062 FPM
Wings 540 RPM.................16,524 FPM 16,524 FPM
1000 RPM...............13,980 FPM 13,980 FPM
Driveline Size:
Main (44R or CV)................ Cat 5 Cat 5
Wings................................Cat 5 Cat 5
Deck Thickness........................ 10 Gauge 10 Gauge
Side Skirts............................... 1/4”x10-1/2” 1/4”x10-1/2”
Replaceable Skid Shoes............ Standard Standard
*Safety Deflectors are standard equipment. Single and double chain guards are available
as extra equipment at extra cost. Servis-Rhino recommends mowers be equipped with
deflectors or double chain guards for all mowing purposes. Single chain guards may be
used for agriculture purposes only and are specifically not recommended for highway,
right-of-way, parks or greenbelt mowing.
**Ratings based on actual field performance.
SR20 SR14
Standard Equipment and Specifications