Filter
Top Products
OPERATION
INTERSTATER 02/11 Operation Section 4-25
© 2011 Alamo Group Inc.
OPERATION
11.1 Engaging and Disengaging the Power Take Off (PTO) and Wings
Before engaging the PTO, make certain that the area is clear of bystanders and passersby. The implement
must be lowered to the mowing position. NEVER engage the PTO with the implement in the raised position.
Set the tractor engine speed at approximately 1,000 RPM before engaging the PTO. Shift the PTO control to
the on position.
To start the wings, make sure they are in the lowered position (refer to Lowering Wings into Operating Position
of the operation section) and PULL the start/stop button(s) to start the wing motor(s) and slowly increase the
engine speed until the PTO is operating at the rated speed. If you hear unusual noises or see or feel abnormal
vibrations, lower the engine RPM’s, disengage the PTO and PUSH the wing start/stop button(s) to stop the
wing motor(s). Inspect the implement to determine the cause of the noise or vibration and repair the
abnormality.
Do not let the Blades turn when the Mower Deck is raised for any
reason, including clearance or for turning. Raising the Mower deck
exposes the Cutting Blades which creates a potentially serious hazard
and could cause serious injury or even death from objects thrown from
the Blades.
(SRM-07)
Do not put hands or feet under mower decks. Blade Contact can result
in serious injury or even death. Stay away until all motion has stopped
and the decks are securely blocked up.
(SGM-09)