Filter
Top Products
ASSEMBLY
INTERSTATER 02/11 Assembly Section 3-13
© 2011 Alamo Group Inc.
ASSEMBLY
1. Attach the two Pump Case Drain hoses p/n
001788 (Item 1 and 2) from the Hydraulic Pump
to the Hydraulic Tank. ASM-FL-0029
2. Attach the two Suction hoses p/n 001783
(Items 3 and 4) from the Hydraulic Pump to the
vertical suction tubes on the hydraulic tank.
ASM-FL-0029 Fit hoses and cut to length so
that there is no kink after they are installed.
3. Attach the left wing pressure hose (Item 1) to
the first Hydraulic Pump. ASM-FL-0030
4. Attach the right wing pressure hose (Item 2) to
the second Hydraulic Pump. ASM-0030
5. Slide the Protective Sleeving (Item 3) over
these hoses. ASM-FL-0030 & 0031