Filter
Top Products
184 Chapter 7
Custom Real Time I/Q Baseband
Working with Differential Data Encoding
5. Press Return > Differential Encoding Off On.
This applies the custom differential encoding to a user-defined modulation.
NOTE Notice that (UNSTORED) appears next to Differential State Map on the signal
generator’s display. Differential state maps are associated with the user-defined
modulation for which they were created.
To save a custom differential state map, you must store the user-defined modulation for
which it was designed. Otherwise the symbol table offset data is purged when you press
the Confirm Exit From Table Without Saving softkey when exiting from the I/Q or FSK editor.