Filter
Top Products
42
Key (ENT), has different purposes depending on the menu we are:
• Setting values. Press key (ENT) to activate the function setting, the Figures in
the screen will blink. With keys
- the character to set is selected and with
keys - the value is selected. To confirm press (ENT). Next field will blink, to
continue doing settings proceed in the same way or press (ESC) to return to
no-setting situation.
• Validation of orders or commands.
When pressing key (ESC) you will go back to the previous screen of any screen of
any submenu, , unless you are in the “Parameters” menu and in the process of
setting any of them. If so, by pressing the (ESC) key the value will stop blinking,
and by pressing it a second time you will go back to the previous screen.
With the UPS in bypass mode, use the ESC button to cancel alarms. In this way the
audible alarm is turned off.
Notes related with the screen map (see Fig. 27):
• Some screens have a certain number of “–” characters. Each screen represents
one function so the maximum length of the field will be determined by the
number of characters.
• Each screen is labeled with a number located in its right bottom corner. It is only
included as a mere reference for its next description and explanation.
Fig.26:
2
3
a
b
c
d
e
1
Control panel parts