Appendix B Control Panel Menus 307
EIO Menu (8000 N/8000 DN)
CFG TCP/IP=NO NO
YES
NO: The TCP/IP Menu is not accessible.
YES: The TCP/IP Menu appears. In the TCP/IP Menu, you
can specify BOOTP=YES for TCP/IP parameters to be
automatically loaded from a bootp or DHCP server when
the printer is turned on. If you specify BOOTP=NO, you can
manually set selected TCP/IP parameters from the control
panel. You can manually set each byte of the IP address
(IP), Subnet Mask (SM), Syslog Server (LG), and Default
Gateway (GW). Also, you can manually set the Timeout
time period.
CFG ETALK=NO NO
YES
NO: The EtherTalk Menu is not accessible.
YES: The EtherTalk Menu appears. In the EtherTalk Menu
you can set the AppleTalk phase parameter (ETALK PHASE=1
or 2) for your network.
Item Values Explanation
