Validation For the most recent validation cycle, displays the Nominal Value,
Allowed Percent Deviation, and the Measured Value of each variable in
the Validation Data table. See Figure 5-5 for an example report.
Note
If the actual deviation is beyond the allowed amount, then the row will be
flagged with an asterisk (*).
Final
Validation
For the most recent validation run, shows the Nominal Value, Allowed
Percent Deviation, and the Average Value of each variable in the
Validation Data table. See Figure 5-6 for an example report.
Note
If the actual deviation is beyond the allowed amount, then the row will be
flagged with an asterisk (*).
Raw Data Displays a list of data for each peak that was detected during the run,
including the retention time, peak area, and peak height. See Figure 5-7
for an example report.
Every Run Displays a configurable list of calculations after each run. See
Section 4.5.2 for more information.
Hourly Displays a configurable list of average calculations each hour, beginning
at the time set in the Average Calculations window at Application →
Calculations → Averages... . See Section 4.5.2 for more information.
24 Hour Displays a configurable list of average calculations each day, beginning
at the time set in the Average Calculations window at Application →
Calculations → Averages... . See Section 4.5.2 for more information.
Weekly Displays a configurable list of average calculations each week, beginning
on the day set in the Average Calculations window at Application →
Calculations → Averages... . See Section 4.5.2 for more information.
Monthly Displays a configurable list of average calculations each month,
beginning on the day of the month set in the Average Calculations
window at Application → Calculations → Averages... . See Section 4.5.2
for more information.
Variable Displays a configurable list of average calculations every hour at the
time entered in the Hours column in the Average Calculations window at
Application → Calculations → Averages... . See Section 4.5.2 for more
information.
Auto Valve
Timing
Displays a Auto valve Timing report.
Module
Validation
Displays a Module Validation report.
Each report begins with the following header information:
Date-Time The GC’s date and time when the report was generated.
Logs and reports
5
Logs and reports
119
