DES-7200 Configuration Guide Chapter 3 RIPng
Configuration
3-10
attribute for static routes redistributed to BGP on Router C, while Router B can
redistribute BGP routes with specified community attribute to the RIPng domain.
Fig 3 Redistribution configuration
Detailed configuration
Router A:
# Configure network interface.
DES-7200(config)# interface gigabitEthernet 0/1
DES-7200(config-if)# ipv6 enable
DES-7200(config-if)# ipv6 address 2001:db8:12::1/64
DES-7200(config-if)# ipv6 rip enable
# Configure RIPng.
DES-7200(config)# ipv6 router rip
DES-7200(config-router)# exit
Router B:
# Configure network interface.
DES-7200(config)# interface gigabitEthernet 0/1
DES-7200(config-if)# ipv6 enable
DES-7200(config-if)# ipv6 address 2001:db8:12::2/64
DES-7200(config-if)# ipv6 rip enable
DES-7200(config)# interface gigabitEthernet 0/2
DES-7200(config-if)# ipv6 enable
DES-7200(config-if)# ipv6 address 2001:db8:23::2/64
# Configure RIPng.
DES-7200(config)# ipv6 router rip
DES-7200(config-router)# redistribute bgp route-map riprm
