Yamaha MU80 Portable Generator User Manual


 
124
APPENDIX
6. Polyphonic Aftertouch
Status: AnH
The message is not effective under initial settings to enable use of this message, send system
Exclusive to change the polyphonic aftertouch parameters.
If multipart parameter “Rcv POLYPHONIC AFTERTOUCH” is Off, the part ignores this
message. It is not necessary for the effect to apply to all note numbers (0~127).
7. Exclusive Messages
XG System On
F0H,43H,10H,4CH,00H,00H,7EH,00H,F7H
11110000 F0 Exclusive status
01000011 43 YAMAHA ID
0001nnnn 1n Device Number
00101011 4C Model ID
00000000 00 Address High
00000000 00 Address Mid
01111110 7E Address Low
00000000 00 Data
11110111 F7 End of Exclusive
This message switches SOUND MODULE MODE to XG and initializes the XG settings.
The message requires approximately 50ms to execute, so sufficient time should be al-
lowed before the next message is sent.
GM System On
F0H,7EH,7FH,09H,01H,F7H
11110000 F0 Exclusive status
01111110 7E Universal Non-realtime ID
01111111 7F Device ID
00001001 09 Sub ID1
00000001 01 Sub ID2
11110111 F7 End of Exclusive
Resets all data values to their defaults, with the exception of the MIDI Master Tuning value.
MIDI Master Volume
F0H,7FH,7FH,04H,01H,llH,mmH,F7H
11110000 F0 Exclusive status
01111110 7F Universal Realtime ID
01111111 7F Device ID
00001001 04 Sub ID1
00000001 01 Sub ID2
0lllllll l l Master Volume LSB
0mmmmmmm mm Master Volume MSB
11110111 F7 End of Exclusive
Changes volume of all channels. (“Universal System Exclusive”)