Xantrex Technology GT 2.5-DE, GT 3.8-DE, GT 2.8-SP, GT 3.8-SP Portable Generator User Manual


 
Front Panel Display Screens and What They Mean
975-0253-01-01 5–5
Additional
messages for
multiple unit
systems only
In addition, to the normal system message screens, additional screens specific to
each GT Inverter unit can be displayed when the unit is connected with
communications wiring to other GT Inverters. These screens are only available on
multiple unit systems.
To view unit-specific screens in a multiple unit system:
1. Tap the Xantrex logo near the LCD to advance the display to the next screen.
Continue tapping until the final system message screen (“Grid Readings”, in
Table 5-3 above) is displayed.
2. Tap again. Normal operation screens shown in Table 5-4 are displayed in the
order given, as you tap successively on the unit.
If you continue to tap the unit, then the LCD will cycle through all of the available
normal operation screens. Each message is displayed for up to 30 seconds. If you
do not tap again within that time period, then the LCD backlight turns off and the
display reverts to the default normal operation screen (Table 5-2).
Offline Mode
Offline default
display
At night and when no power is being produced by the PV array (offline mode), the
GT Inverter displays the screen shown in Table 5-5.
* In a multiple unit system with network cables properly installed, the system
values displayed are for the entire system. For example, in a two-inverter
system, if inverter #1 is producing 1500 W and inverter #2 is producing
2000 W, both inverters display a total system power of 3500 W. Time online
and array readings are for the local inverter and PV array associated with that
inverter.
Table 5-4
Additional Normal Operation Screens for Each GT Inverter in a
Multiple Unit System
Tap Display Description
6th time Unit 1500W
Today 1.250kWh
Power being produced by this unit now.
Cumulative energy produced by this unit today.
7th time Unit Lifetime
150kWh
Lifetime energy produced by this GT Inverter unit
Table 5-5
Offline Mode Default Display
Display Description
Inverter
Offline
Displayed at all times while the system is offline.