Filter
Top Products
Replacing the Internal Battery
975-0057-01-01 4-9
Replacing the Battery
Before attempting to replace the internal battery, make sure
you:
• Disconnect any charging cables, 12 V DC appliances,
and AC appliances from the XPower Powerpack.
• Turn off the AC Outlet On/Off switch and turn off the
light switch.
• Remove the jump-start cables.
To replace the battery:
1. Place the XPower Powerpack upright on a stable, level
surface.
2. On the XPower Powerpack, unscrew the four fasteners
on the battery cover. Place the fasteners in the cover for
safe keeping.
WARNING: Shock or Electrical Hazard
Read this entire section before disassembling the unit.
WARNING
If you do not know how to safely remove and install batteries,
have this task performed by a qualified service technician.
WARNING: Fire hazard
When installing the replacement battery, make sure the
battery polarity is correct. Reverse polarity will damage the
XPower Powerpack and could cause serious injury.
XPower 400 Powerpack Plus.book Page 9 Thursday, October 20, 2005 12:58 PM