Filter
Top Products
Maintenance
4-4 975-0057-01-01
To recharge the XPower Powerpack while you drive using
the DC Charging Cable:
1. While the vehicle engine is running, plug one end of the
DC Charging Cable into the DC Power Socket of the
XPower Powerpack.
2. Plug the opposite end of the DC Charging Cable into the
vehicle’s lighter socket or 12 V accessory outlet.
3. Once the XPower Powerpack is fully charged or if your
vehicle’s engine is not running, disconnect the DC
Charging Cable from both sockets.
Most of the XPower Powerpack’s capacity will be
restored in four hours while the vehicle engine is
running.
WARNING: Fire and Explosion Hazard
Do not use this recharging method if your vehicle has
abnormally high voltage electrical systems that operate above
15 V DC. This may lead to accumulations of hydrogen,
causing exposure to fire and explosion hazard.
CAUTION
Do not operate AC or DC appliances while the XPower
Powerpack is being recharged with the DC Charging Cable
from your vehicle.
Note: The green Charging Status light will not illuminate
when the XPower Powerpack is recharged through the DC
Charging Cable.
Note: Battery Charge (%) indicator is only accurate when
the XPower Powerpack has been disconnected from all
appliances and all charging sources for fifteen minutes.
XPower 400 Powerpack Plus.book Page 4 Thursday, October 20, 2005 12:58 PM