Xantrex Technology 975-0057-01-01 Yard Vacuum User Manual


 
Maintenance
4-2 975-0057-01-01
Recharging the XPower Powerpack Battery
To check the battery’s charge level, press the Display
Function button.
You can recharge the battery using:
the fully automatic “plug-in-and-forget” AC Charger.
the DC Charging Cable to recharge from your vehicle as
you drive.
a generator equipped with a regulated 12 V battery
charging outlet.
a solar panel.
Recharging with the AC Charger
Recharging with the AC Charger is a true “plug-in-and-
forget” charging method.
CAUTION
Do not attempt to recharge the XPower Powerpack battery if
it is frozen. Gradually warm the frozen battery to 32 °F (0 °C)
before recharging.
Note: Battery Charge (%) status is only accurate when
the XPower Powerpack has been disconnected from all
appliances and all charging sources for fifteen minutes.
CAUTION
Do not operate AC or DC appliances while the XPower
Powerpack is being recharged with the AC Charger.
The AC Charger may be permanently damaged if AC
appliances or 12 V DC appliances are operated while the AC
Charger is connected.
XPower 400 Powerpack Plus.book Page 2 Thursday, October 20, 2005 12:58 PM