Filter
Top Products
XPower Powerpack Features
975-0057-01-01 2-3
Control Panel Operation
4 Digital Display displays the inverter’s Output Power in W and
Battery Charge status in % FULL.
5
Charging Status light illuminates when the
XPower Powerpack
is in Charging Status mode (i.e. AC Charger is connected to the
inverter’s Charger Input Socket and plugged into the household
120 V AC outlet).
6 Battery Charge % light illuminates (green) when Battery Charge
information is displayed on the Digital Display.
7 Output Power (W) light illuminates (green) when Output Power
information is displayed on the Digital Display.
8 Display Function button, when pressed, allows for reading Battery
Charge status on the Digital Display. Toggles Digital Display’s
power ON/OFF.
Not
shown
Audible Alarm (inside the unit) sounds in the event of overheating
or low battery protection on inverter.
Monitor total
AC power
consumed by
the
applications
powered from
the
Powerpack’s 2
AC outlets
Inverter’s ON/OFF
switch is turned ON;
Output Power (W)
light illuminates
(green);
AC charger is
unplugged from the
wall AC outlet.
No action required.
The Digital Display
will show the AC
power drawn from the
inverter by the
applications powered
from the Powerpack’s
AC outlets.
In order to save the
battery power and
ensure longer inverter
run time, press Display
Function button to turn
off the Digital Display.
Press Display Function
button again to turn the
display On for AC
power reading.
XPower 400 Powerpack Plus.book Page 3 Thursday, October 20, 2005 12:58 PM