Xantrex Technology 300 C Portable Generator User Manual


 
Troubleshooting Reference
39
Over-
temperature
shutdown
Heat Turn off the AC Outlet On/Off
switch, and let the Jazz PP 300 C
cool down.
Alarm sounds Internal battery is
nearly discharged.
(10.7 volts).
If you ignore this
warning, the Jazz PP
300 C automatically
switches off when the
battery reaches 10.0
volts.
Recharge the Jazz PP 300 C.
Recharge light
is amber
(indicating
recharging)
while battery
level indicates
full.
Battery status reading
is incorrect during
recharge.
Battery Level
indicators are only
accurate when the Jazz
PP 300 C has been
disconnected from all
appliances and all
charging sources for
fifteen minutes.
Allow Recharge cycle to go into
Ready mode.
Unplug the charging sources and any
appliances and let the Jazz PP 300 C
rest for 15 minutes to get an accurate
reading.
Compressor
runs but won’t
inflate.
The valve connector
may not be securely
on the valve stem.
The item being
inflated may have a
leak.
Check that the valve connector is
securely on the valve stem before
closing the thumb latch.
Check that the item being inflated
has no leaks.
Check the compressor hose for any
breaks or leaks at connections.
Table 4 Troubleshooting reference
Problem Possible Cause Solution
Jazz 300.book Page 39 Thursday, February 28, 2002 11:36 AM