Filter
Top Products
Connecting to an External Battery
24
5. Repeat steps 2 and 3.
To disconnect the jump-start cables from an external
battery and from the Jazz PP 300 C:
1. To disconnect the Jazz PP 300 C from the external
battery when the external battery is discharged or no
longer needed, remove the red positive (+) clip, and then
remove the black negative (–) clip.
2. Remove the jump-start cables from the Jumper Cable
Port.
3. Recharge the Jazz PP 300 C as soon as possible after use.
WARNING: Sparking and Explosion
Do not remove the jump-start cables from the jumper
cable port when the positive and negative clips are
connected to the terminals of the external battery.
Removing the jump-start cable from the jumper-cable
port while they are connected to the vehicle’s battery
terminals will disable the jump-start safety feature and
could result in sparking or explosion.
Jazz 300.book Page 24 Thursday, February 28, 2002 11:36 AM