Filter
Top Products
Front Panel Detail
5
②
②②
②
Battery Status Button indicates
the charge state of the battery.
Battery Level indicators are
inaccurate if you press the
Battery Status Button while
the Jazz PP 300 C is running
an appliance or is being
recharged.
③
③③
③
Recharge Indicator illuminates
only when the battery is being
recharged through the Charger
Input Socket and not through the
DC Charging Cable. The light is
amber when charging, and green
when the battery is fully charged.
Once the battery is fully
charged, the charging circuitry
switches automatically into its
maintenance charge mode.
④
④④
④
Vehicle Jump-Start Features
• Reverse Polarity Alarm
sounds and the red Battery
Clips Connected Improperly
illuminates when the jump-
start cables are incorrectly
connected to the battery
terminals.
• Battery Clips Connected
Properly (Green light)
illuminates if jump-start cables
are correctly connected to the
positive and negative terminals
of the vehicle battery being
boosted.
Jazz PP 300 C can detect a
reverse polarity condition
(caused by incorrectly
connecting the jump-start
cables to a battery) and
automatically stops the flow
of current.
The special jump-start safety
feature prevents sparking at
the battery terminals and
prevents potential damage to
your vehicle’s electrical
system.
Not
shown
Audible alarm (inside the unit)
sounds in the event of overheating,
low battery protection, and reverse
polarity jump-start connection.
Feature Description Note
Jazz 300.book Page 5 Thursday, February 28, 2002 11:36 AM