Xantrex Technology 300 C Portable Generator User Manual


 
Recharging the Jazz PP 300 C Battery
27
Recharging with the AC Charger
Recharging with the AC Charger is a true “plug-in-and-
forget” charging method.
To recharge with the AC Charger:
1. Disconnect any 12 volt DC appliances.
2. Turn the AC Outlet On/Off switch to off, and turn the
fluorescent light switch off.
3. Plug the AC Charger into a standard AC wall outlet.
4. Insert the AC Charger cable end into the Charger Input
Socket.
5. While the Jazz PP 300 C is recharging, the Recharge
indicator is amber. If the battery is completely
discharged, a typical recharge may take up to 40 hours.
When fully charged, the Recharge indicator changes to
green and the Jazz PP 300 C is ready to use.
Once the battery is fully charged, the charging current
automatically reduces to a low maintenance level and the
Jazz PP 300 C may be left permanently connected to the
AC Charger. If your utility power is interrupted, the
charging process automatically restarts when power
returns.
CAUTION
Do not use the Jazz PP 300 C to operate any AC
appliances or 12 volt DC appliances while recharging
with the AC Charger.
The AC Charger may fail if AC appliances or 12 volt
DC appliances are operated while the AC Charger is
connected.
Jazz 300.book Page 27 Thursday, February 28, 2002 11:36 AM