Filter
Top Products
Operating AC Appliances
16
Although Jazz PP 300 C can supply momentary surge power
greater than 300 watts, some appliances may exceed the
capabilities of the Jazz PP 300 C and trigger the inverter’s
safety overload shutdown circuit. See “Troubleshooting
Reference” on page 36 for the reset procedure.
Trouble Appliances
Some appliances may be damaged if they are connected to
the Jazz PP 300 C. See “Precautions for Using Rechargeable
Appliances” on page vii.
Operating Several Appliances at Once
You can run several AC appliances if the total of all the
appliances’ rating (in watts) do not exceed 300 watts. You
can run appliances using an AC power bar or DC splitter.
Run time, however, will decrease accordingly with the
number of appliances being operated and the AC power being
consumed.
Operating an AC Appliance
Before operating your AC appliance, ensure that the battery
of the Jazz PP 300 C is fully charged. See “Recharging with
the AC Charger” on page 13 for details.
To operate an AC appliance:
1. Open the protective covering on the right side of the Jazz
PP 300 C. Turn the AC Outlet On/Off switch to the On
position.
The switch illuminates to indicate AC power is available
at the AC Outlet.
2. Plug the AC appliance into the AC Outlet and turn the
appliance on. Jazz PP 300 C will operate most devices
rated up to 300 watts.
3. Recharge the Jazz PP 300 C as soon as possible after each
use.
Jazz 300.book Page 16 Thursday, February 28, 2002 11:36 AM