Filter
Top Products
Replacing the Fluorescent Tubes
33
Make sure the positive battery terminal is next to the red
positive (+) internal cable and the black negative terminal
is next to the black negative (–) internal cable.
5. Securely fasten the bolt, washer, and nut that holds the
red positive (+) cable to the positive (+) battery terminal
and the black negative (–) cable to the negative (–)
battery terminal.
6. Do not overtighten the nut and bolt.
Consult the battery manufacturer for torque
specifications.
7. Replace the compressor unit and the four fasteners.
8. Dispose of the old battery in an environmentally
responsible manner.
Replacing the Fluorescent Tubes
To replace a fluorescent tube:
1. Turn the light switch off.
2. Remove the clear cover by grasping it on each side at the
top and pulling the top of the cover away from the unit.
3. Gently grasp the fluorescent tube and rotate ¼ turn to
remove it.
4. Insert the replacement tube and rotate ¼ turn to lock the
tube in place.
5. Reattach the clear cover.
Jazz 300.book Page 33 Thursday, February 28, 2002 11:36 AM