Safety 7
TCH4500 Safety Rules (7/8//2005)
Make sure all safety decals are installed.
Replace if damaged. (See Safety Decals section for
location.)
When lubricating telescoping PTO drives, keep
fingers out of shield access slots to prevent injury.
Check blade bolts for proper torque after every
8 hours of operation. Check blades and rotate or
resharpen daily as required to keep blades sharp.
Failure to do so may cause poor performance,
damage, or personal injury and will void the
machine warranty.
Before inspecting, servicing, storing, or chang-
ing an accessory, shut off power source, make
sure all moving parts have come to a complete
stop, and disconnect PTO driveline.
STORAGE
Block equipment securely for storage.
Keep children and bystanders away from stor-
age area.
Follow manual instructions for storage.
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!