Filter
Top Products
4 Introduction
MAN0458 (9/23/2005)
GENERAL INFORMATION
The purpose of this manual is to assist you in oper-
ating and maintaining your chipper. Read it care-
fully. It furnishes information and instructions that
will help you achieve years of dependable perfor-
mance. These instructions have been compiled
from extensive field experience and engineering
data. Some information may be general in nature
due to unknown and varying operating conditions.
However, through experience and these instruc-
tions, you should be able to develop procedures
suitable to your particular situation.
The illustrations and data used in this manual were cur-
rent at the time of printing, but due to possible inline
production changes, your chipper may vary slightly in
detail. We reserve the right to redesign and change the
chipper as may be necessary without notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the equipment facing the direction of forward
travel.
SPECIFICATIONS
TCH4500
Overall Size 56-1/2" x 51-1/2" x 36-1/2"
Maximum Chipper Capacity 4-1/2 dia.
Chipper Blade 2 - Reversible
3/8" x 5-3/32" x 4"
Rotor Size 14" dia. x 1
Rotor Weight (with blades) 49 lbs
Rotor Weight (without blades) 45 lbs
Discharge Size 4.5" x 9" (Standard)
4.5" x 4.5" (Optional)
Drive Type Belt
Belt Size 2RB47 ARMID Construction
Weight 390 lbs