Filter
Top Products
The default efficiency value is displayed for the sprinkler type
selected. To change the value, turn the Lower Line knob to
adjust the value from 10 – 95%.
2.
SPKLR EFFICIENCY
STA 01
70 Percent (default)
27
Set Sprinkler Efficiency
Select Soil Type
Like the sprinkler PR value, the Sprinkler Efficiency value is a key
factor used by the Intelli-Sense to calculate an efficient watering
program for each station. The controller will automatically enter an
efficiency value based on the type of sprinkler selected for the station.
Changing the efficiency value will alter overall station watering
operation as follows:
▲ Increasing sprinkler efficiency (sprinkler performs above average),
decreases overall watering.
▼ Decreasing sprinkler efficiency (sprinkler performs below average),
increases overall watering.
1. Turn the Upper Line knob to display Spklr Efficiency.
The soil type displayed is the default for the sprinkler type
selected. To change the soil type, turn the Lower Line knob
to select one the following options:
• Sandy
• Sandy Loam - Higher percentage of sand than clay
• Loam - Equal percentage of sand and clay
• Clay Loam - Higher percentage of clay than sand
• Clay.
2.
SOIL TYPE
STA 01
Sandy
1. Turn the Upper Line knob to display Soil Type.