Filter
Top Products
Command Descriptions
2–284
TDS Family Oscilloscope Programmer Manual
TRIGger:MAIn:EDGE:SLOpe
Selects a rising or falling slope for the main edge trigger. This is equivalent to
setting Slope in the Trigger menu.
Trigger
TRIGger:MAIn:EDGE:SLOpe { FALL | RISe }
TRIGger:MAIn:EDGE:SLOpe?
:
MAIn
TRIGger
EDGE :
<Space>
?
FALL
RISe
:
SLOpe
FALL specifies to trigger on the falling or negative edge of a signal.
RISE specifies to trigger on the rising or positive edge of a signal.
TRIGGER:MAIN:EDGE:SLOPE RISE
sets the main edge trigger to occur on the rising slope.
TRIGger:MAIn:EDGE:SOUrce
Sets or queries the source for the main edge trigger. This is equivalent to setting
Source in the Trigger menu.
Trigger
TRIGger:MAIn:EDGE:SOUrce { AUXiliary (not available on TDS
520C &
TDS 724C) | CH<x> | LINE }
TRIGger:MAIn:EDGE:SOUrce?
Group
Syntax
Arguments
Examples
Group
Syntax