Filter
Top Products
Command Descriptions
2–218
TDS Family Oscilloscope Programmer Manual
MEASUrement:IMMed:UNITS? (Query Only)
Returns the units for the immediate measurement.
Measurement
MEASUrement:IMMed:TYPe
MEASUrement:IMMed:UNITS?
:MEASUrement
IMMed
:
UNITS
?
<QString> returns "V" for volts, "s" for seconds, "Hz" for hertz, "VV" for
volts
2
,or "%" for percent.
On the TDS 400A, <QString> also returns "c" for clocks, "Vc" for volt-clocks,
or "/c" for 1/clks.
MEASUREMENT:IMMED:UNITS?
might return "s", indicating that the units for the immediate measurement are
seconds.
MEASUrement:IMMed:VALue? (Query Only)
Immediately executes the immediate measurement specified by the MEASUre-
ment:IMMed:TYPe command. The measurement is taken on the source(s)
specified by a MEASUrement:IMMed:SOURCE command.
Measurement
MEASUrement:IMMed:VALue?
:MEASUrement
IMMed
:
VALue
?
<NR3>
Group
Related Commands
Syntax
Returns
Examples
Group
Syntax
Returns