Filter
Top Products
Command Descriptions
2–220
TDS Family Oscilloscope Programmer Manual
Measurement
MEASUrement:MEAS<x>:DELay?
:MEASUrement
MEAS
<x> ?
:
DELay
MEASUREMENT:MEAS3:DELAY?
might return :MEASUREMENT:MEAS3:DELAY:EDGE1 RISE;
EDGE2 RISE;DIRECTION FORWARDS.
MEASUrement:MEAS<x>:DELay:DIREction
Sets or queries the starting point and direction that determines the delay “to”
edge when taking a delay measurement. The waveform is specified by
MEASUrement:MEAS<X>:SOURCE2. This command is equivalent to setting
the direction in the Delay Edges & Direction side menu.
Measurement
MEASUrement:MEAS<x>:DELay:DIREction { BACKWards | FORWards }
MEASUrement:MEAS<x>:DELay:DIREction?
:MEASUrement
MEAS
<x>
:
DELay
:
DIREction
<Space>
?
BACKWards
FORWards
BACKWards means that the search starts at the end of the waveform and looks for
the last rising or falling edge in the waveform. The slope of the edge is specified
by MEASUrement:MEAS<x>:DELay:EDGE2.
FORWards means that the search starts at the beginning of the waveform and
looks for the first rising or falling edge in the waveform. The slope of the edge is
specified by MEASUrement:MEAS<x>:DELay:EDGE2.
MEASUREMENT:MEAS1:DELAY:DIRECTION BACKWARDS
starts searching from the end of the waveform record.
Group
Syntax
Examples
Group
Syntax
Arguments
Examples