Filter
Top Products
Command Descriptions
2–166
TDS Family Oscilloscope Programmer Manual
HORIZONTAL:DELAY:TIME 2.0E-3
sets the delay time between the main and delayed time base to 2 ms.
HORizontal:DELay:TIMe? (Query Only)
Returns the delay time parameters.
Horizontal
HORizontal:DELay:TIMe:RUNSAfter?, HORizontal:DELay:TIMe:TRIGAfter?
HORizontal:DELay:TIMe?
:
DELay
:
HORizontal
TIMe
?
HORIZONTAL:DELAY:TIME?
might return :HORIZONTAL:DELAY:TIME:16.0E-9 for the delay time.
HORizontal:DELay:TIMe:RUNSAfter
Sets or queries the delay time to wait after the main trigger before the delayed
time base begins. This is equivalent to setting Delayed Runs After Main in the
Time Base side menu of the Horizontal menu.
Horizontal
HORizontal:DELay:MODe
HORizontal:DELay:TIMe:RUNSAfter <NR3>
HORizontal:DELay:TIMe:RUNSAfter?
Examples
Group
Related Commands
Syntax
Examples
Group
Related Commands
Syntax