Filter
Top Products
– 36 –
Tightening torque : 7.0
-
9.0 N
m
70
-
90 kgf
cm
(5.2
-
6.6 ft
lbs)
5-4-13 Air cleaner bottom plate and carburetor
Install the insulator,gaskets, carburetor, baffle stay, and
air cleaner base plate into the cylinder head.
M6 Flange nut : 2pcs.
5-4-14 Air cleaner
Install the element and air cleaner cover onto the air
cleaner base plate.
M6 x 18mm Flange bolt : 1pce.
Air cleaner
base plate
Carburetor
Air cleaner
NOTE: Please do not forget to install the gasket.
5-4-11 Base
Install the Base into the engine main body.
M8 x 20 Bolt and washer : 4pcs.
M6 Flange nut : 4pcs.
Tightening torque : 9.0-11.0 N m
90-110 kgf
cm
(6.6
-
8.1 ft
lbs)
Tightening torque : 18.0
-
20.0 N
m
180
-
200 kgf cm
(13.3
-
14.8 ft lbs)
NOTE: Avoid cutting your hand by the sharp edge of
the base.
Base
5-4-12 Front frame
Install the front frame (L) and (R) onto the Base.
Front frame