Filter
Top Products
– 22 –
5. ASSEMBLY AND DISASSEMBLY
5-1) PRECAUTIONS
(1) Be sure to memorize the location of each part when disassembling the generator so that the generator can be
correctly reassembled. Tag the disassembled parts with the necessary information to facilitate easier and
smoother reassembling.
(2) For greater convenience, divide the parts into several groups and store them in boxes.
(3) To prevent bolts and nuts from being misplaced or installed incorrectly, place them temporarily back at their
original position.
(4) Handle disassembled parts with care; wash them with clean oil.
(Do not clean electrical parts with oil nor water.)
(5) Use proper tools correctly for each specific job.
(6) Please be sure to glue the sponge inside the cover. Please replace the sponge if it is deformed, peeled, or
damaged, with a new one. The generator performance may be negatively affected by the lack of a sponge or
deformed, peeled or damaged sponge.
(7) Tie the electric wires and fuel pipe with wire bands as necessary.
Please refer to Robin Engine Service Manual EH09 for the assembly and disassembly of the engine.
5-2) SPECIAL TOOLS
Use the proper, specialized tools for disassembly and assembly.
By using the proper, specialized tools, maintenance trouble and damage of the equipment can be avoided.
Name of the tool Form Use methodParts No.
To remove
Flywheel with Rotor
Rotor puller
33K9990001