Filter
Top Products
– 33 –
Flywheel
Rotor
Rotor Bolt
Recoil starter
5-4-4 Recoil starter
Attach the recoil starter to the crankcase.
M6 x 18mm Flange bolt : 3pcs.
Tightening torque : 7.0
-
9.0 N
m
70
-
90 kgf
cm
(5.2
-
6.6 ft
lbs)
5-4-5 Rotor and Flywheel
Install the Rotor and Flywheel.
M8 x 195mm Rotor bolt : 1pce.
NOTE 1: Wipe off any oil from the tapered shaft and hole
before assembling.
NOTE 2: Counterclockwise threads are applied onto the
Rotor (through) bolt. Take cake when tightening
Tightening torque : 19.0
-
21.0 N
m
190
-
210 kgf
cm
(14.0
-
15.5 ft
lbs)
Flywheel
Ignition coil
5-4-6 Air gap adjustment of flywheel and Ignition
coil
Adjust the air gap between flywheel and Ignition coil to
0.5mm with a feeler gauge. Attach the Ignition coil to the
engine.
Air gap : 0.5 mm