Filter
Top Products
– 29 –
5-3-18 Remove the rotor and Flywheel
Remove the rotor and Flywheel.
M8 x 195mm Rotor bolt : 1pce.
Tools : 12mm Box wrench
NOTE 1: Flywheel can be removed with Rotor at the
same time.
NOTE 2: Counterclockwise threads are applied onto the
Rotor (through) bolt. Take care when removing.
Rotor
Rotor Bolt
5-3-17 Remove the Stator / Rear cover
Remove the Stator / Rear cover.
M6 x 25mm Flange bolt : 3pcs.
Tools : 10mm Box wrench
NOTE : The stator is attached to the rear cover, both can
be removed together.
Stator
Rear cover
Rear cover
5-3-19 Remove Blower housing
Remove the blower housing.
M8 x 55mm Flange bolt : 1pce.
M8 x 90mm Flange bolt : 3pcs.
Tools : 12mm Box wrench
NOTE : The pipe knock is attached to two places.
Blower
Housing