Filter
Top Products
-
49
-
(4) Fasten the other earth cable with 5 mm termi-
nal to the unpainted bolt hole on the frame.
(See Fig.10-28.)
10-3-7 MUFFLER and MUFFLER COVER
(1) Temporarily fix the muffler bracket to either the
rear or front covers for RGV6100 or RGV2800.
M8 x 20 mm bolt and washer Ass’y . . . 2 pcs.
(2) Attach the muffler cover 1 and the muffler cover
2 to the muffler.
M6 x 10 mm bolt and washer Ass’y . . . 8 pcs.
(3) Put the muffler gasket to the engine.
(4) Attach the muffler with muffler cover to the
engine and the rear cover .
1 Tighten the two nuts for the muffler first. Use
the spring washers for RGV4100 and
RGV6100.
8 mm stainless nut . . . 2 pcs.
8 mm spring washer . . . 2 pcs.
(for RGV4100 and RGV6100 only)
2 Tighten the bolts to fix the muffler to the rear
cover.
M8 x 20 mm bolt and washer Ass’y . . . 2 pcs.
(for RGV4100)
Fig. 10-28
euqrotgninethgiT
m-N8.9-9.7
mc-gk001-08
bl-tf2.7-8.5
euqrotgninethgiT
m-N5.42-6.81
mc-gk052-091
bl-tf0.81-7.31
euqrotgninethgiT
m-N4.72-6.12
mc-gk082-022
bl-tf2.02-8.51
Fig. 10-29
EARTH CABLE