Filter
Top Products
-
46
-
10-3 ASSEMBLY PROCEDURES
10-3-1 FRONT COVER
Attach the front cover to the engine main bearing
cover. Match the faucet joint and tighten the bolts.
M8 x 20 mm bolt . . . 4 pcs.
M8 spring washer . . . 4 pcs.
10-3-2 ROTOR
(1) Wipe off oil, grease and dust from the tapered
portion of engine shaft and matching tapered
hole of rotor shaft.
(2) Mount the rotor to the engine shaft. Tighten
the through bolt. Apply a wrench on the through
bolt and hit wrench handle clockwise with a
hammer to tighten. If an impact wrench is
available, use it.
Tightening torque :
Fig. 10-21
Fig. 10-22
euqrotgninethgiT
m-N7.31-8.11
mc-gk041-021
bl-tf1.01-7.8
euqrotgninethgiT
0082VGR
m-N2.31-3.11
mc-gk531-511
bl-tf8.01-7.8
0014VGR
0016VGR
m-N5.42-5.22
mc-gk052-032
bl-tf5.91-6.61