Filter
Top Products
WARNING
Before starting the assembly, make sure to wear the protective glasses.
9-1-2
Assembly
Steps
GREASE PASTING
(1)
Setting the reel into the case.
-1
:Paste grease on the case. (Fig.
9-3)
-2
:
Adjust the position
of
the inner end
of
the
spring, which is set in the reel. (Fig.
9-4)
-3
:Hold
the reel
so
that the shafthook part and
the inner end
of
the spring are hooked to-
gether. Drop the reel gently from above into
the case.
Fig.
9-3
-4
:
Move the reel slightly counter-clockwise and
make sure the spring
is
hooked.
THE
END
TOUCHES
THE
RIB
OF
THE BEARING
Fig.
9-4
(2)
Setting
the
attachments
-1
:
Set the latchet into the reel. (Fig.
9-5)
THE LATCHET
IS
KEPT AT CLOSE-POSITION
Fig.
9-5
-2
:
Holding the latchet, set the
sub-assembly. (Fig.
9-6)
latchet-guide
SET
SCREW
RATCH ET
GUIDE
I
cb-'
FRICTION
/
SPRING
LATCHET
GUIDE
SUB-ASSEMBLY
Fig.
9-6
-
51
-