Filter
Top Products
12-2-1 INPUT SHAFT
The input shaft is a wholly carburized. product in which chrome-molybudenum steel
is
used, and the gear
A
and spline are
built
in
it.
12-2-2 OUTPUT
SHAFT
The output shaft is made
of
carbon steel, and the gear
C
is fitted
in
spline engagement.
12-2-3 SHAFT
B
The shaft
B
is
made
of
chrome-molybudenum steel, and wholly carburized.
12-2-4 GEAR
C
and GEAR
€3
The gear
C
and the gear
B
are wholly carburized products, in which chrome-molybudenum steel is used, and are helical gears
with module
of
2.
12-2-5 ADAPTOR and GEAR CASE
The.adaptor and the gear case are components of a body
of
the
1/2
reducer, and are made of aluminum alloyed dicast.
12-2-6
COUPLING
The
coupling is a component to deliver output from the engine to the
1/2
reducer, and
is
fitted to the input shaft in spline
engagement. The coupling
is
a wholly carburized product in which molybudenum steel
is
used.
NOTE:
Grease is stored in the spline section, and the section
is
sealed with
a
packing and
an
O-ring.
-50-